Lundby Park KV. A

Construsoftbimawards - Lundby Park KV. A
Kategorie Komerční projekty
Rok 2020
Země Poland
Organizace CES Polska
Autor CES Polska
Spoluautoři A:Arkitekterna Krook & Tjäder AB, Strängbetong
Klient Svensk Fastighets Förmedling
Místo stavby Trollhasselgatan, Göteborg / Sweden
Tags

Projekt Lundby Park Kv. A jest budynkiem wielorodzinnym posiadajacym 8 kondygnacji. Budynek ma ksztalt trapezu o wymiarach 55,7m x 53,4m z patio w srodku nad garazem. Na pierwszej kondygnacji znajduja sie lokale uslogowe oraz garaze, na kondygnacjach posrednich znajduja sie lokale mieszkalne, na poddaszu wystepuja pomieszceznia gospodarcze. Budynek posida 6 klatek schodowych, od strony fasady pólnocnej do mieszkan prowadza zewnetrzne korytarze (SE: loftgång). Budynek zostal podzielony na 3 czesci i jest aktualnie montowany wg. tej kolejnosci.Konstrukcja budynku zostala zaprojektowana jako zelbetowa prefabrykowana, cala w zakresie CESu. W budynku wystepuja równiez elementy stalowe, a ostatnia kondygnacja jest przekryta drewniana wiezba dachowa, elementy te nie byly w zakresie CESu.Model w Tekli, do statusu CLOD 200, byl wykonywany przez Strangbeton w biurze w Veddige, gdzie równiez byly opracowywane obliczenia statyczne oraz detale polaczen. Po zwolnieniu elementów do CLOD 200 i przygotowaniu wytycznych, model a nastepnie rysunki byly opracowywane przez CES.Konstrukcje pionowa budynku tworza slupy(RP) wewnetrzne sciany jednowarstwowe(V), zewnetrze sciany trójwarstwowe z warstwa ocieplenia i warstwa fasadowa w postaci warstwy betonu z ceglami zalewanymi na produkcji (Wex) , warstwy malowanego betonu (W) , z warstwa cegiel mocowana na budowie (V/I). Konstrukcje pozioma tworza plyty kanalowe sprezone (HD/F) oraz plyty pelne wewnatrz klatek schodowych (RD) oraz balkony (BD).

Project Lundby Park Kv. A is a multi-family building with 8 storeys. The building has a trapezoidal shape measuring 55.7m x 53.4m with a patio in the middle, above the garage unit.

On the first floor there are service premises and garages. The intermediate floors are residential. Utility rooms are located at the attic. The building has 6 staircases. From the north façade of the building are located outer passages (SE: loftgång) which are leading to the residential part.

Building has been divided to 3 parts and it is currently assembled according to this order.

The building structure was designed as a precast reinforced concrete, all in CES. There are also steel structural elements and the wooden roof tower above the last floor but these elements were not designed by CES.
Tekla model, up to CLOD200 status was made by Strangbeton in Veddige Office, where static calculations and details were also developed. After releasing the elements on CLOD200 with further guidelines, CES developed the model and the drawings.
The vertical structure of the building consists of pillars (RP), inner single layer walls (V), external three-layer walls with insulation and casted bricks on façade (Wex), external three-layer with painted concrete (W) and one layer walls with a brick layer fixed on the site (V/I). The horizontal structure is made of hollow core slabs (HD/F), solid slabs inside staircases (RD) and balconies (BD).

Komentáře

0 Comments
Inline Feedbacks
View all comments